150ft Vehicle Sensor Exit Wand
|
OLD IRONSIDE GATE HANDLE
Safety hook and body formed as one
All metal parts permanently assembled
Large insulating grip
Molded of a soft flexible material
Performs in any climate
1793 OLD IRONSIDES GATE HANDLE
COLOR:Black
|
20-2 DOUBLE DOOR GUIDES
Designed for large, by-passing doors
Floor mounted guide keeps doors from -
bumping into each other
Adjustable to maximum of 3" thick doors
Zinc Plated
20-2 ZN DBL DOOR GUIDE
FINISH:Zinc Plated
|
2110 SAFETY GATE HOOK
Designed for animal enclosures, secures heavy -
wood gates and doors
Steel wire & hot-rolled steel plate staples
Zinc plated
Safety lock closes automatically to help -
prevent accidental opening by livestock
Includes 2-1/4" x 1-7/8" X-heavy plate staples
Boxed loose - barcoded
2110BC 8 IN. ZN SAFETY GATE HOOK
SIZE:8"
|
298BC GATE PINTLES
Designed for use with #294 hinge straps
Gate can be easily lifted off of pintle
Designed for heavy-duty gates & doors
Pintles are punched for 5/16" (1/2" size)-
or 3/8" (5/8" size) bolts
Manufactured from hot-rolled steel
Boxed loose
298BC 1/2 ZN GATE PINTLE
SIZE:1/2"
FINISH:Zinc Plated
|
298BC GATE PINTLES
Designed for use with #294 hinge straps
Gate can be easily lifted off of pintle
Designed for heavy-duty gates & doors
Pintles are punched for 5/16" (1/2" size)-
or 3/8" (5/8" size) bolts
Manufactured from hot-rolled steel
Boxed loose
298BC 5/8 ZN GATE PINTLE
SIZE:5/8"
FINISH:Zinc Plated
|
POST HINGE
Use 2 for single walk gate
Use 4 for double drive gate
Male hinge
328530C 2-3/8 IN. GATE POST HINGE
SIZE:2-3/8x5/8"
|
WALK GATE HARDWARE SET
For attaching a walk gate to a terminal post
Includes (2) post hinges, (2) frame hinges, -
fork, collar plus nuts and bolts
328536C 2-3/8 WLK GATE HDW SET
SIZE:2-3/8"
|
DRIVE GATE HARDWARE SET
For attaching double gate to terminal post
Includes (4) post hinges, (4) frame hinges-
plus nuts and bolts
Does NOT include drop rod
328538C 2-3/8 DRV GATE HDW SET
SIZE:2-3/8"
|
CORNER GATE ELBOW
Used for making gate frames
Includes bolts and nuts
328623C 1-3/8 IN. GATE ELL
SIZE:1-3/8"x 1-3/8"
|
GATE CLIP
Attaches chain link fabric with tension bar
to gate frame
328633C 1-3/8 IN. GATE CLIP
SIZE:1-3/8X5/8"
|
'OLD FAITHFUL' GATE HANDLE
High quality, high impact styrene
Measures 4-3/4" between flanges
All metal parts plated
Heavy stamped steel hook
503 DARE PLASTIC GATE HANDLE
COLOR:Red
|
76BC SERIES DOOR & GATE SPRINGS
Spring steel wire door & gate spring
Designed for doors and lightweight gates
Looped ends for easy installation
Hooks not included
Zinc plated
Boxed loose - barcoded
76BC ZZN #6 DOOR & GATE SPRING
SIZE:#6
|
76BC SERIES DOOR & GATE SPRINGS
Spring steel wire door & gate spring
Designed for doors and lightweight gates
Looped ends for easy installation
Hooks not included
Zinc plated
Boxed loose - barcoded
76BC ZN #4 DOOR & GATE SPRING
SIZE:#4
|
76BC SERIES DOOR & GATE SPRINGS
Spring steel wire door & gate spring
Designed for doors and lightweight gates
Looped ends for easy installation
Hooks not included
Zinc plated
Boxed loose - barcoded
76BC ZN #5 DOOR & GATE SPRING
SIZE:#5
|
77BC DOOR SPRING
Spring steel wire - zinc plated finish
For gates and screen & storm doors that -
require an extra-heavy spring
Looped ends for easy installation
Hooks not included
Zinc plated
Boxed loose - barcoded
77BC 1X16 IN. ZN DOOR/GATE SPRING
SIZE:1"
|
EASY-GATE NO SAG BRACKET KIT
Steel construction - easy gate bracket kit
Use for openings 27"-72" wide
For fence gates, shed doors, driveway gates,-
corral gates, barn doors and many more
Includes 2 pre-hinged & 2 common brackets
Hinges are welded to bracket for strength
Universal left or right hand swing
No Z braces- no angles cuts needed
80099 EASYGATE BRACKET SYSTEM
|
The Adjust-A-Gate™ Drop Rod kit is perfect for keeping that double drive gate in place. Constructed of heavy duty solid steel +with a galvanized finish and a guide bracket with self-tapping screws for easy installation. Attaches to one half of a double gate assembly for securing your gates closed or in the open position, also used on single gates to secure your gate opened when needed. Drop rod assembly for Adjust-A-Gate I
|
Helps keep the battery warm in cold weather climates. Recommended where outside temperatures get below 32F for extended periods of time.
|
4870 EXTRA HEAVY DECORATIVE GATE HINGE
Extra heavy gate hinge for gates, -
sheds and barn doors
WeatherGuard for maximum protection -
from the outdoor elements
Visual package with 1 hinge per pack
Installation fasteners included
N214-113 BLACK HVY GATE HINGE
SIZE:3-5/8"
FINISH:Black
|
Designed for light duty dual swing gates up to a maximum of 12 ft long or maximum weight of 300 lbs.
Ideal for the DIY (Do It Yourself) property owner, the MM272 comes equipped with detailed instructions, online how-to videos & unlimited access to 24 hour technical support.
|
Pin Lock (FM133) The Pin Lock substitutes for the clevis pin at either or both mounting points of the opener. Helps prevent theft of the opener from the gate, while allowing quick release of the opener.
|
#15 BAR HOLDER
Used to reinforce doorways against forced entry
Provides secure placement of 2x4 lumber against-
entry side of door
2x4 may be lifted up out of bar holders
Can be used with #14 closed bar holder
Packed loose
Made from hot rolled steel
15 ZINC OPEN BAR HOLDER
FINISH:Zinc Plated
|
V21 SERIES AUTOMATIC GATE LATCH
For outswinging gates, doors & animal pens
Strike can be mounted either on gate or post
Latches automatically
Designed for right or left hand applications
Can be padlocked
Hole punched in release lever for rigging-
cord release from opposite side
Visual pack with screws
V21 ZINC AUTOMATIC GATE LATCH
FINISH:Zinc Plated
|
V22 AUTOMATIC GATE LATCH
Designed with angled bar for out-swinging gates
Strike can be mounted on post or gate
Latches automatically - can be padlocked
For right- or left-hand applications
Hole punched in release lever is for rigging -
cord release from opposite side
Made of hot-rolled steel with steel rod bar
Visual pack with screws
V22 BLACK AUTOMATIC GATE LATCH
SIZE:
FINISH:Black
|
8415 ARCHED GATE KIT
Decorative arched design gate kit
Texture powder coat black finish
Designed for applications with narrow mounting-
surfaces, such as gates, barn & shed doors, -
storage bins and tool boxes
Bearing design eliminates metal to metal -
contact for smooth, quiet operation
Includes 2 hinges & 1 latch
V8415 BL ARCHED GATE KIT
CAPACITY:48 Lb. SWL
FINISH:Black
|
1261 AUTOMATIC GATE LATCH
Designed for out-swing gates, doors & pens
Strike can be mounted on the gate or -
the post - latches automatically
For right or left hand applications
Can be padlocked for added security
Matte black finish on stainless steel material
Visual pack
V1261 M-BK GATE LATCH
FINISH:Matte Black
|
V10 11" DECORATIVE GATE PULL
11" gate pull - matte black finish on -
stainless steel material
Designed for gates, cabinets, doors & drawers
Ornamental design for a variety of applications
Hex lags included for mounting
Visual pack
V10 11 IN. M-BK GATE PULL
PACK TYPE:Visual Pack
FINISH:Matte Black
|
V8 SPEAR GATE PULL
Decorative Spear design pull
Casted steel material
For a variety of applications
Ideal for gates, sheds and doors
Visual pack
V8 8 IN. BL HEAVY-DUTY SPEAR PULL
SIZE:8"
FINISH:Black
|
835 ADJUSTABLE THROW CANE BOLT
Designed for use on heavy wood gates & doors
Can bolt anchors one gate while the gate -
latch acts as a stop for the other gate
Designed for vertical & horizontal applications
Can be held in both closed & open positions by -
using two sockets
(1/2" or 3/4" pipe recommended but not included)
Visual pack with screws
V835 5/8X18 BL CANE BOLT
SIZE:5/8" x 18"
FINISH:Black
|
874 ANTI-SAG GATE KIT
|
V973 GATE PULL
|
|
|
|
|
Copyright © 2009-2022 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |